Sản phẩm > Máy và thiết bị sau in > Máy bế & cấn nếp tự động BRAUSSE

BRAUSSE 1450SE

BRAUSSE-1450SE.jpg

BRAUSSE 1450SE
Automatic Flatbed Diecutting & Creasing Machine with Stripping Station


Features


Feeder

 
Preloading device mounted at the front of the feeder
Non stop feeder with automatic pile lift
Suction head with several adjustment possibilities to handle different kind of materials
Two turbo blowers for positive separation of thin paper
Motorized side adjustment of pallet table
Pile adjustment during production
Electrical double sheet control
Fine air blast at lead edge for smooth thin paper transport
Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays
Synchronizing device to adjust the sheet positioning to the front lay by hand during production
Side lays on both sides adjustable for push and pull
Electronic side lay control
Four separate adjustable front lays with clock read out system. Operation outside of the machine
Two electronic front lay controls by means of Omron fibre optic sensors
Safety device for lowering of pallet carrier
 


Die cutting section

 
Indication of die cutting pressure by means of digital read out device
Cam driven gripper opener at diecutting section entrance
Pneumatic system for locking the die chase frame
Motorized pressure adjustment system
Torque limit safety clutch for main chain drive
Air Blowing device for stabilising thin paper after arriving the die section
 


Stripping section

 
Triple action movement of the upper and lower stripping tools
Movement of the upper chase can be switched on and off electrically
By means of remote control under the stripping device the upper chase can be moved up and down electrically to ensure a simple adjustment of the lower pins
The under stripping movement can be switched off mechanically
 


Delivery

 
Automatic non-stop delivery with curtain. This curtain moves into the delivery to catch the stripped sheets during the exchange of the piles
Blowing device to press down the sheets by means of adjustable bars
Back and side joggers adjustable
Gripper edge removing system with transport belt to remove the gripper edge sideways to the drive side
Tape inserter with counter
Safety device on lowering of the steel plate
 

Specifications

Maximum Paper Size: 1450 x 1100 mm (57" x 43 -1/4")
Minimum Paper Size: 700 x 500 mm (27-1/2" x 19 -3/4")
Maximum Cutting Size: 1420 x 1080 mm (55-7/8" x 42 - 1/2")
Maximum Cutting Pressure: 400 tons
Stock range : Cardboard 0.2 - 2 mm (0.008" - 0.078")
Corrugated board: 0.7 - 4.5mm (0.028" - 0.18")
Minimum Gripper Margin: 10 mm
Gripper Bite Range: 4.5 - 12mm
Inner Die Chase Size: 1480 x 1106 mm (58- 1/4" x 43 - 1/2")
Cutting Plate Size: 1472 x 1086 mm (59" x 42 - 1/4")
Maximum Mechanical Speed: 5500 s/h
Variable Speed Main Motor: 22 KW
Other Power Required: 36 KW
Overall Length: 9880 mm
Overall Width: 5270 mm
Overall Height: 2580 mm
Total Net Weight (approx.): 28 tons

Sản phẩm liên quan